This guide walks you through the process of changing flight crew on a trip that includes multiple sectors (legs). Crew changes are handled by adding additional crew members during trip creation and assigning them appropriately on each sector.
Step 1: Add Crew on the New Trip Page
To enable crew changes mid-trip, all crew members who will be flying any sector must be added at the start.
-
Go to the New Trip page.
-
Add the PIC (Pilot in Command) and SIC (Second in Command).
-
Add any crew members who will take over later as Relief Pilots or Additional Crew.
Step 2: Configure Flight Crew on the First Sector
-
Navigate to the Preflight screen of the first sector.
-
You'll see the initially assigned PIC and SIC listed under the Flight Crew section.
-
If the roles have changed or need adjustment, tap each field to assign the correct crew members.
Step 3: Complete the Sector and Add a New One
-
Complete the Preflight and Postflight for the first sector as usual.
-
When prompted with “Add New Sector?”, select Yes to proceed to the next leg of the trip.
Step 4: Update Crew on the Next Sector
-
-
On the Preflight screen for the second sector, update the PIC and SIC assignments as needed.
-
You can assign different crew from those added earlier.
-
By following these steps, you can efficiently manage crew transitions across multi-leg trips.