It is best practice to create your Risk Assessments first.
1. Click on the ‘Risk Assessments’ tab
2. Click on the ‘+ Create Template’ button
3. The number is autogenerated but can be overtyped, give the Risk Assessment a name, and add a description if required
4. Click on the ‘Save’ button
5. A Hazards area is enabled, click on the ‘Add’ button within this are
6. Enter a name for the hazard
7. Add as many hazards as is required
8. Click on the ‘Save’ button
Once the Hazards have been inputted there needs to be consequences added to each hazard (this can be one or more)
9. If inputting for the first time click on the ‘‘+ Add’ button within the Consequence area, if editing existing consequences or adding additional ones click on the Play button
10. Click on the ‘+ Add’ button
11. Input as many consequences as is required
12. Select a Main Impact area (these areas can be configured via Centrik)
13. Scoring for this risk uses the risk matrix of your organisation that is used in Centrik
14. Selecting the Sev area will display the Severity areas and calibration for the risk matrix
15. Selecting Likel will display the Likelihood areas and calibration for the risk matrix
Selecting the combined area will display the risk matrix for selection.
16. Make the relevant selection
17. Click on the ‘Save’ button
18. Repeat the steps for each Consequence within each Hazard
Once completed a list of hazards, and the associated consequences is displayed.