Adding a Check – Periodic check (System Default)
1. Click on the class button of the equipment that you want to check
2. Select the specific equipment from the available list
Alternatively, you can search for the equipment using the search function, and click on the details button once selected.
3. Within the Periodic Checks area, click on the ‘Add Check’ button
The checklist that you created previously is displayed
4. Work through the checklist, selecting the appropriate dropdown answers for OK/Defect/Fail
You are also able to add any comments that might be required
5. Select a Result for the check from the dropdown list
The Completed by, and completed on areas will be auto populated, or this can be overtyped by entering a system user
6. Click on the ‘Save’ button, or the ‘Complete (OK)’ button
You are able to Re-open this check (if required) by clicking on the ‘Re-Open’ button, delete this check, by clicking the ‘Delete’ button, or download this check, by clicking on the ‘Download’ button.
Once a check is completed the timeframe to the next check is reset.
Adding a Check – Periodic check (Tasking Style (Config Required))
1. Click on the class button of the equipment that you want to check
2. Select the specific equipment from the available list
Alternatively, you can search for the equipment using the search function, and click on the details button once selected.
3. Within the Periodic Checks area, click on the ‘Add Check’ button
A summary of the check is displayed.
4. Click on the ‘Save’ button
The checklist that you created previously is displayed
5. Work through the checklist, Clicking on the appropriate buttons for OK/Defect/Fail
You are also able to add any comments that might be required
This style of checklist doesn’t have a Results area, however any Recordable Values that have been added are available to be selected using this style
Within each specific piece of equipment there is a history button that holds all of the periodic checks that have been completed.
Clicking on the ‘History’ button displays the history of the checks, there is a selectable date period available to assist in filtering of results. Clicking on the Check name of any check will display that check in full.
Adding In-Service Checks (if configured)
1. Select the piece of equipment that you wish to make a check on
2. Within the Daily Usage area, select the date for the check by clicking on the Daily Check area under the actual date
3. Click on the ‘Add Check’ button
4. Complete the check areas, marking Ok/Fail/Defect where applicable and add any comments, if required
5. With in the Result section, select from the dropdown choices. Add in who completed the check if it wasn’t completed by you (this person needs to be a Centrik user)
6. Click on the ‘Save’ button
Adding In-Service Checks - Tasking Style (if configured)
1. Select the piece of equipment that you wish to make a check on
2. Within the Daily Usage area, select the date for the check by clicking on the Daily Check area under the actual date
3. Click on the ‘Add Check’ button
4. Click on the ‘Save’ button
5. Complete the contents areas, marking Ok/Fail/Defect where applicable and add any comments, if required
6. Add in any Recordable Values in the blank boxes
This style of check has a history button available for selection